Users Guide

NOTE: In some environments where the Edge Gateway may be installed, a more robust mounting method is required. For
example, for mounting in marine applications, it is recommended to use only the standard— mount bracket. The
recommendation is due to the presence of vibrations unique to the marine environment.
1. Connect an Ethernet cable to Ethernet port one.
2. Connect the antennas depending on the configuration ordered (optional).
NOTE:
The antennas supported in the Edge Gateway vary depending on the configuration ordered. Antennas are
available in the accessory box shipped with the Edge Gateway.
Table 11. Antennas supported in Edge Gateway 3001
Antennas
supported
Signals
3001 Yes Yes Yes Not applicable Yes
NOTE: Use only the supplied antennas or third-party antennas that meet the minimum specifications.
NOTE: Depending on the configuration ordered, some of the antenna connectors may not be present or may be capped.
NOTE: Mobile broadband antenna connector two is for LTE Auxiliary only; it does not support 3G.
3. Insert the antenna into the connector.
NOTE: If you are installing multiple antennas, follow the sequence indicated in the following image.
16 Installing your Edge Gateway