Users Guide

Table 29. ZigBee antenna maximum gain (dBi)

Antenna position—Bent Antenna position—Straight

Frequency (MHz) ZigBee (dBi) ZigBee (dBi)

2400~2500

0.4 1.7

De-mounting from DIN-rail bracket

1. Pull the Edge Gateway down to release from DIN-rail bracket.

2. Lift the Edge Gateway bracket off the DIN rail.

Connecting to the Edge Gateway

Windows 10 IoT Enterprise LTSB 2016

Boot up and login – Remote system configuration

NOTE: Your computer must be on the same subnet as the Edge Gateway.

1. Connect a network cable from Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides IP

addresses.

NOTE: The first-time boot to Windows takes about 5 minutes for system configuration. Subsequent boot-ups take about 50

seconds.

2. Using the MAC address provided on the front cover of the Edge Gateway, obtain the IP address through your network’s DHCP server

or through a network analyzer.

3. On the Windows computer, search for Remote Desktop Connection and launch the application.

4. Log in using the IP address.

NOTE: Ignore any certification errors when connecting to your Edge Gateway.