Users Guide

Windows 10 IOT Enterprise LTSB 2016 basic functions

BIOS update

For more information about updating the BIOS, see Accessing and updating the BIOS.

Watchdog Timer

The Watchdog Timer for Windows 10 IoT Enterprise LTSB 2016 is controlled through the BIOS setting.

The Watchdog Timer is enabled and disabled under the BIOS setting Watchdog Timer.

NOTE: For more information about BIOS settings on the Edge Gateway, see Default BIOS settings.

Cloud LED

NOTE: To utilize the Cloud LED, download the necessary tools and drivers from www.dell.com/support.

One unique feature of the Edge Gateway 3000 Series is the

Cloud LED

. Cloud LED enables you to visually inspect the operational status of

the Edge Gateway by looking at the display light on the left panel of the Edge Gateway.

To enable this feature, you must expose and program a GPIO register on the Edge Gateway.

Follow these steps to control the Cloud LED on the Edge Gateway:

1. Download the Cloud LED utility from www.dell.com/support.

2. Extract the following files:

a. DCSTL64.dll

b. DCSTL64.sys

c. DCSTL64.inf

d. DCSTL64.cat

e. CloudLED.exe

NOTE: These files must be in the same directory.

3. Run the CloudLED.exe from Command Prompt or PowerShell with administrative rights. Run the following commands:

• CloudLED.exe ON

• CloudLED.exe OFF

TPM support

Windows 10 IoT Enterprise LTSB 2016 supports TPM 2.0. For more information about TPM resources, see technet.microsoft.com/en-us/

library/cc749022.

System shutdown and restart

Click Start → Power, and then click Restart or Shutdown to restart or shutdown the Edge Gateway, respectively.

LAN and WLAN network configuration

In the Search box, type Settings and open the Settings window. Select Network & Internet to configure the network.

Bluetooth configuration

In the Search box, type Settings and open the Settings window. Select Devices, and then select Bluetooth from the menu on the left

panel to configure the network.

WWAN (5815) network configuration

NOTE: Ensure that the micro-SIM card is already activated by your service provider before using it in the Edge Gateway. For more

information, see activate your mobile broadband service.

Follow these steps after installing the micro-SIM card:

1. In the Search box, type Settings and open the Settings window.

2. Select Network & Internet.