Users Guide

NOTE: USB power is limited to 0.6 A/3 W for USB 3.0 port and 0.4 A/2 W for USB 2.0 port to ensure that the Edge Gateway is

within the allowed 13 W PoE Class 0 range.

2. Connect an Ethernet cable to Ethernet port one.

3. Connect the antennas depending on the configuration ordered (optional).

NOTE: The antennas supported in the Edge Gateway vary depending on the configuration ordered. Antennas are available in

the accessory box shipped with the Edge Gateway.

Table 7. Antennas supported in Edge Gateway 3003

Antennas supported

Signals