User Manual

e. WWAN card

f. plamrest

g. SSD card

h. keyboard

i. keyboard trim

j. base cover

k. battery

5. Follow the procedures in After Working Inside Your computer.

Removing the Coin-Cell Battery

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. battery

b. base cover

c. keyboard trim

d. keyboard

e. SSD card

f. palmrest

3. Perform the following steps as shown in the illustration:

a. Disconnect the coin-cell cable from the computer [1].

b. Lift the coin-cell battery from the computer [2].

Installing the Coin-Cell Battery

1. Place the Coin-cell battery on the computer.

2. Connect the coin-cell battery cable to the computer.

3. Install:

a. plamrest

b. SSD card

c. keyboard trim

d. keyboard