Owner`s manual

4. Install:

a) palmrest assembly

b) base corner caps

c) base cover

d) display-hinge cover

e) optical drive

f) hard drive

g) keyboard

h) keyboard trim

i) battery

j) ExpressCard

k) SD Card

5. Follow the procedures in

After Working Inside Your Computer

Removing the WiFi-Switch Board

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) SD Card

b) ExpressCard

c) battery

d) keyboard trim

e) keyboard

f) hard drive

g) optical drive

h) display-hinge cover

i) base cover

j) base corner caps

k) palmrest assembly

3. Perform the following steps as shown in the illustration:

a) Disconnect the WiFi-switch board cable from the system board.

b) Remove the screws that secure the WiFi-switch board and lift it from the computer.