Owner`s manual

Installing the Palmrest Assembly

1. Align the palmrest assembly to its original position in the computer and snap it into place.

2. Tighten the screws to secure the palmrest assembly to the computer.

3. Connect the following cables:

a) media board

b) Unified Security Hub (USH) board

c) touchpad

d) Wi-Fi board

e) LED board

4. Flip the computer and tighten the screws to secure the palmrest assembly to the base of the computer.

5. Install:

a) base corner caps

b) base cover

c) display-hinge cover

d) optical drive

e) hard drive

f) keyboard

g) keyboard trim

h) battery

i) ExpressCard

j) SD card

6. Follow the procedures in

After Working Inside Your Computer

Removing the ExpressCard Cage

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) SD Card