Owner`s manual

Removing the Display-Hinge Cover

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the battery.

3. Remove the screws that secure the display-hinge cover to the computer and remove it from the computer.

Installing the Display-Hinge Cover

1. Align the display-hinge cover with the screw holes.

2. Tighten the screws to secure the display-hinge cover to the computer.

3. Install the battery.

4. Follow the procedures in

After Working Inside Your Computer

Removing the Palmrest Assembly

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) SD card

b) ExpressCard

c) battery

d) keyboard trim

e) keyboard

f) hard drive

g) optical drive

h) display-hinge cover

i) base cover

j) base corner caps

3. Remove the screws that secure the palmrest assembly to the base of the computer.