Owner`s manual

Installing the Coin-Cell Battery

1. Place the coin-cell battery in its slot.

2. Connect the coin-cell battery cable to the system board.

3. Install:

a) base cover

b) battery

4. Follow the procedures in

After Working Inside Your Computer

Removing the Heatsink Assembly

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) battery

b) base cover

3. Disconnect the fan cable and remove the screws that secure the heatsink assembly to the system board.

NOTE: Remove the screws in the numerical order as displayed in the image.

4. Perform the following steps as shown in the illustration:

a) Lift the heatsink assembly from the computer.

b) Slide the heatsink assembly.