Dell™ Latitude™ E6400 XFR Setup and Features Information WARNING: A WARNING indicates a potential for property damage, personal injury, or death. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. NOTE: A NOTE indicates important information that helps you make better use of your computer.
Dell™ Latitude™ E6400 XFR Setup and Features Information 1 Microphone 16 PC or PC-Express card slot (optional) ( 2 Camera light (optional) 17 IEEE 1394a connector ( 3 Display latch and release 18 Fingerprint reader (optional) 4 Camera (optional) 19 Contactless smart-card reader (see Smart Cards) ( ) ) ) 5 DirectVue™ Outdoor-Readable Display (optional touchscreen) 20 Optional touchscreen stylus tether 6 Keyboard status lights 21 Secure Digital (SD) memory-card reader ( ) 7 Volume
Dell™ Latitude™ E6400 XFR Setup and Features Information Back View 1 14 2 13 3 12 11 4 10 5 6 7 8 9 1 PR-481™ Ultra-Performance Chassis Material 8 Security cable slot ( 2 RJ-11 modem connector ( 9 Video connector ( 3 RJ-45 network connector ( 10 eSATA/USB connector ( 4 Battery access panel 11 USB PowerShare connector ( 5 Battery/power lights 12 Sealed QuadCool™ thermal management 6 Multimode Display Port ( 13 Hard Disk Drive ( 7 AC adapter ( 14 Enclosed Smart-card reader
Dell™ Latitude™ E6400 XFR Setup and Features Information 3 Bottom View 1 2 1 Sealed QuadCool™ thermal management 2 Sliding cover to docking device connector ( 3 Battery release latches ) Battery Removal WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Dell™ Latitude™ E6400 XFR Setup and Features Information 1. Release the rear panel. a. Push the latch to the right, to its unlocked position. b. Then, press the latch down. a b 2. Lower the rear panel. NOTE: See the battery removal instructions adhered to the edge of the battery. 3. With the battery door open, press in the two battery release latches on the bottom of the computer. This releases the battery locks.
Dell™ Latitude™ E6400 XFR Setup and Features Information 4. Use the tab on the edge of the battery to remove the battery from the computer. Battery Installation 1. Insert battery until you hear a click and a mechanical stop. 2. Rotate the door into place and push shut. 3. Ensure the door is in the fully closed and locked position. Hard Drive Removal 1.
Dell™ Latitude™ E6400 XFR Setup and Features Information NOTE: See hard drive removal instructions adhered to the edge of the hard drive. 2. Press in the blue locking button on the right side of the compartment. 3. While pressing in the blue locking button, use the tab on the edge of the hard drive to pull the hard drive from the compartment. Hard Drive Installation 1. Insert hard drive until you hear a click and a mechanical stop. 2.
Dell™ Latitude™ E6400 XFR Setup and Features Information Back Press-Fit Doors A press-fit door is opened by inserting a finger into the door slot and pulling the door away from the computer. To close the door, rotate the door back towards the computer and press until it is in its fully closed position. Side Latch Doors The latch door is opened by sliding the latch towards the rear of the computer, and then rotating the door down.
Dell™ Latitude™ E6400 XFR Setup and Features Information Front Secure Digital Door The secure digital door is located at the front of the computer behind the handle. 1 1 Secure digital door To open the secure digital door, extend the small handle that is built in to the door front. 1 1 Secure digital door handle in extended position Use the small handle on the door to pull the door open.
Dell™ Latitude™ E6400 XFR Setup and Features Information The Secure Digital card can be fully inserted, allowing the protective door to be closed. Insert the card into the secure digital slot until it is fully seated in its connector. To release the secure digital card, press in on the card edge and the reader will eject the card. Reverse the procedure to close the protective door. Setup WARNING: Before working inside your computer, read the safety information that shipped with your computer.
Dell™ Latitude™ E6400 XFR Setup and Features Information 3. Connect USB devices, such as a mouse or keyboard. 4. Connect IEEE 1394 devices, such as a DVD player. 5. Open the computer display and press the power button to turn on the computer. Smart Cards There are two main types of Smart or Common Access Cards (CAC): 1. Enclosed Smart Cards ( ) — these cards have a contact area with many gold plated connection pads.
Dell™ Latitude™ E6400 XFR Setup and Features Information 1 1 Enclosed smart-card reader The Smart Card can be fully inserted, allowing the protective hinged door to be closed. Insert the card into the smart card slot with the gold contact pad facing upward and pointing toward the smart card slot. Slide the card into the slot until it is fully seated in its connector. To release the smart card, press in on the card edge and the reader will eject the card. 2.
Dell™ Latitude™ E6400 XFR Setup and Features Information You can launch the pre-loaded documentation by selecting Start -> Programs -> Touchkit -> Document. Touchkit Configuration Utility Your DirectVue Touch Display system incorporates EETI technology. Touchkit is a software utility tool that allows you to configure various touch features. You can launch Touchkit by clicking Start -> Programs -> Touchkit -> Configure Utility.
Dell™ Latitude™ E6400 XFR Setup and Features Information • linearization is completed, the linearity of the touch screen will be shown in the Linearization Curve window. Draw Test: Used for accuracy and performance checking. 1. 4 Points Calibration The touch screen must be calibrated before it can work accurately. This function pops up a new window to guide you through the 4 points calibration.
Dell™ Latitude™ E6400 XFR Setup and Features Information clicks within the specified area in the specified double click time will be recognized as a double click event. 5. Mouse Emulation mode There are 5 mouse emulation modes for the Touchkit touch screen controllers. Press on the button to change the emulation mode. • Normal Mode You can select this mode to select objects, and drag objects.
Dell™ Latitude™ E6400 XFR Setup and Features Information 1 3 1 Tether anchor points 2 Tether 1 2 3 Stylus NOTE: The stylus and tether are provided when the computer is configured with the optional touchscreen. NOTE: The tether can be anchored on either front corner of the computer. The stylus and tether are connected to the computer by looping the tether through either anchor points provided at the front corners of the computer. 1 1 Close up view of anchor point with tether looped through it.
Dell™ Latitude™ E6400 XFR Setup and Features Information 1. Remove the 4 screws from the front of the computer. 2. Install the shoulder strap anchors to the front of the computer using the screws removed in step 1. 3. Install the shoulder strap to the holes in the shoulder strap anchors.
Dell™ Latitude™ E6400 XFR Setup and Features Information Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start -> Help and Support and select the option to view information about your computer. Video NOTE: Your Dell™ computer has both integrated and discrete video options.
Dell™ Latitude™ E6400 XFR Setup and Features Information Type 12-cell “smart” lithium ion prismatic rugged slice (84 Whr) 6-cell “smart” lithium ion (56 Whr) Dimensions: 6-cell lithium-ion batteries: Depth 206 mm (8.11 inches) Height 19.8 mm (0.78 inches) 12-cell lithium-ion rugged slice battery: Depth 14.48 mm (0.57 inches) Height 217.24 mm (8.55 inches) Weight: 6-cell primary battery 0.33 kg (0.73 lb) 12-cell slice battery 0.85 kg (1.87 lb) Voltage 6-cell battery 11.
Dell™ Latitude™ E6400 XFR Setup and Features Information Output voltage 19.5 V DC Output current 4.62 A Height 32 mm (1.3 inches) Width 60 mm (2.4 inches) Depth 140 mm (5.5 inches) Weight 0.425 kg (0.9 lb) PA-3E 90 E-Series AC adapter: Output voltage 19.5 V DC Output current 4.62 A Height 15 mm (0.6 inches) Width 70 mm (2.8 inches) Length 147 mm (5.8 inches) Weight 0.345 kg (0.
Dell™ Latitude™ E6400 XFR Setup and Features Information Information in this document is subject to change without notice. © 2009 Dell Inc. All rights reserved. Printed in the U.S.A. Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, Latitude, Wi-Fi Catcher, and the DELL logo are trademarks of Dell Inc.
