Owner`s manual
Table Of Contents
- Dell Latitude E6330 Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Removing the Secure Digital (SD) Card
- Installing the Secure Digital (SD) Card
- Removing the ExpressCard
- Installing the ExpressCard
- Removing the Battery
- Installing the Battery
- Removing the Subscriber Identity Module (SIM) card
- Installing the SIM Card
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Base Cover
- Installing the Base Cover
- Removing the Keyboard Trim
- Installing the Keyboard Trim
- Removing the Keyboard
- Installing the Keyboard
- Removing the Wireless Local Area Network (WLAN) Card
- Installing the WLAN Card
- Removing the Bluetooth Module
- Installing the Bluetooth Module
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Palmrest
- Installing the Palmrest
- Removing the Media Board
- Installing the Media Board
- Removing the ExpressCard Cage
- Installing the ExpressCard Cage
- Removing the Speakers
- Installing the Speakers
- Removing the Display-Hinge Covers
- Installing the Display Hinge Covers
- Removing the Display Assembly
- Installing the Display Assembly
- Removing the System Board
- Installing the System Board
- Removing the Heat Sink
- Installing the Heat Sink
- Removing the Power Connector Port
- Installing the Power-Connector Port
- Removing the Input/Output (I/O) Board
- Installing the I/O Board
- Removing the Display Bezel
- Installing the Display Bezel
- Removing the Display Panel
- Installing the Display Panel
- Removing the Camera and Microphone Module
- Installing the Camera and Microphone Module
- Removing the LED Board
- Installing the LED Board
- Removing the Display-Hinge Walls
- Installing the Display-Hinge Walls
- Removing the Display Hinges
- Installing the Display Hinges
- Removing the LVDS and Camera Cable
- Installing the LVDS and Camera Cable
- Docking Port Information
- System Setup
- Diagnostics
- Technical Specifications
- Contacting Dell
Option Description
• Enabled
• Enabled w/PXE (Default Setting)
Parallel Port Allows you to define and set how the parallel
port on the docking station operates. You can
set the parallel port to:
• Disabled
• AT
• PS2
• ECP
Serial Port Identifies and defines the serial port settings.
You can set the serial port to:
• Disabled
• COM1 (Default Setting)
• COM2
• COM3
• COM4
NOTE: The operating system may
allocate resources even if the setting is
disabled.
SATA Operation Allows you to configure the internal SATA
hard-drive controller. The options are:
• Disabled
• ATA
• AHCI
• RAID On (Default Setting)
NOTE: SATA is configured to support
RAID mode.
Drives Allows you to configure the SATA drives on
board. The options are:
• SATA-0
• SATA-1
• SATA-4
• SATA-5
Default Setting: All drives are enabled.
SMART Reporting This field controls whether hard drive errors
for integrated drives are reported during
system startup. This technology is part of the
SMART (Self Monitoring Analysis and
Reporting Technology) specification.
63