Owner`s manual
Table Of Contents
- Dell Latitude E6330 Owner's Manual
- Working on Your Computer
- Removing and Installing Components
- Recommended Tools
- Removing the Secure Digital (SD) Card
- Installing the Secure Digital (SD) Card
- Removing the ExpressCard
- Installing the ExpressCard
- Removing the Battery
- Installing the Battery
- Removing the Subscriber Identity Module (SIM) card
- Installing the SIM Card
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Base Cover
- Installing the Base Cover
- Removing the Keyboard Trim
- Installing the Keyboard Trim
- Removing the Keyboard
- Installing the Keyboard
- Removing the Wireless Local Area Network (WLAN) Card
- Installing the WLAN Card
- Removing the Bluetooth Module
- Installing the Bluetooth Module
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Palmrest
- Installing the Palmrest
- Removing the Media Board
- Installing the Media Board
- Removing the ExpressCard Cage
- Installing the ExpressCard Cage
- Removing the Speakers
- Installing the Speakers
- Removing the Display-Hinge Covers
- Installing the Display Hinge Covers
- Removing the Display Assembly
- Installing the Display Assembly
- Removing the System Board
- Installing the System Board
- Removing the Heat Sink
- Installing the Heat Sink
- Removing the Power Connector Port
- Installing the Power-Connector Port
- Removing the Input/Output (I/O) Board
- Installing the I/O Board
- Removing the Display Bezel
- Installing the Display Bezel
- Removing the Display Panel
- Installing the Display Panel
- Removing the Camera and Microphone Module
- Installing the Camera and Microphone Module
- Removing the LED Board
- Installing the LED Board
- Removing the Display-Hinge Walls
- Installing the Display-Hinge Walls
- Removing the Display Hinges
- Installing the Display Hinges
- Removing the LVDS and Camera Cable
- Installing the LVDS and Camera Cable
- Docking Port Information
- System Setup
- Diagnostics
- Technical Specifications
- Contacting Dell
5. Remove the heat sink from the system board.
Installing the Heat Sink
1. Place the heat sink into its original position on the system board.
2. Tighten the screws to secure the heat sink to the system board
3. Connect the heat-sink cable to the system board.
4. Install:
a) system board
b) display assembly
c) display hinge covers
d) media board
e) palmrest
f) bluetooth module
g) keyboard
h) keyboard trim
i) base cover
j) optical drive
k) hard drive
l) battery
m) ExpressCard
n) SD card
5. Follow the procedures in
After Working Inside Your Computer
.
42