Owner`s manual

Installing the Input/Output (I/O) Board

1. Place the Input/Output (I/O) board in the computer.

2. Tighten the screw to secure the Input/Output (I/O) board to the computer.

3. Install:

a) system board

b) left support frame

c) right support frame

d) display assembly

e) express card reader cage

f) palm rest

g) thermal module

h) right base panel

i) WLAN card

j) hard drive

k) optical drive

l) keyboard

m) keyboard trim

n) access panel

o) battery

p) express card

q) SD memory card

4. Follow the procedures in

After Working Inside Your Computer

Removing the DC-in jack

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) SD memory card

b) express card

c) battery

d) access panel

e) keyboard trim

f) keyboard

g) optical drive

h) hard drive

i) WLAN card

j) right base panel

k) thermal module

l) palm rest

m) express card reader cage

n) display assembly

o) left support bracket

p) system board

3. Remove the DC-in cable from the routing channels.