Owner`s manual

g) optical drive

h) hard drive

i) right base panel

j) thermal module

k) palm rest

l) express card

m) display assembly

n) right support frame

3. Remove the screw that secures the modem card to the computer.

4. Lift the modem card to disengage it from the connector on the back of the card.

5. Disconnect the RJ11 cable from the modem card.

6. Lift the modem card from the computer.

Installing the Modem Card

1. Place the modem card on the Input/Output (I/O) board in the computer.

2. Connect the RJ11 cable to the modem card.

3. Engage the modem card to the connector located at the back of the computer.

4. Tighten the screw to secure the modem card to the computer.

5. Install:

a) right support frame

b) display assembly

c) express card reader cage

d) palm rest

e) thermal module

f) right base panel

g) hard drive

h) optical drive

i) keyboard

j) keyboard trim

k) access panel

l) battery

m) express card

n) SD memory card

6. Follow the procedures in

After Working Inside Your Computer

Removing the Left Support Frame

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove: