Owner`s manual

Installing the Right Support Frame

1. Place the right support frame on the computer.

2. Tighten the screws to secure the right support frame to the computer.

3. Connect the flat flex cable located at the base of the right support frame.

4. Install:

a) display assembly

b) palm rest

c) thermal module

d) right base panel

e) WLAN card

f) hard drive

g) optical drive

h) keyboard

i) keyboard trim

j) access panel

k) battery

l) express card

m) SD memory card

5. Follow the procedures in

After Working Inside Your Computer

Removing The Modem Card

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) SD memory card

b) express card

c) battery

d) access panel

e) keyboard trim

f) keyboard