Owner`s manual

5. Remove the display bezel from the computer .

Installing the Display Bezel

1. Place the display bezel onto the display assembly.

2. Starting from the top corner, press on the display bezel and work around the entire bezel until it snaps onto the

display assembly.

3. Install the battery.

4. Follow the procedures in

After Working Inside Your Computer

Removing the Camera

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a) battery

b) display bezel

3. Disconnect the camera cable.

4. Remove the screw that secures the camera and microphone module.

5. Lift and remove the camera and microphone module.

Installing the Camera

1. Place the camera and microphone module in position on the display bezel.

2. Tighten the screw that secures the camera and microphone module.

3. Connect the camera cable.

4. Install:

a) display bezel