Users Guide

362 Glossary
Open System is one of the network authentication methods. Under open system authentication, any wireless devices
are allowed to access the network without requiring a WEP key.
Out of Paper Reception
Receives faxes into the machine's memory when the machine is out of paper.
Overseas Mode
Makes temporary changes to the fax tones to accommodate noise and static on overseas telephone lines.
P
Paging
This feature is available only in the USA and Canada.
This feature enables your machine to call your cell phone or pager when a fax is received into its memory.
Pause
Allows you to place a delay in the dialing sequence while you are dialing or while you are storing Address Book
numbers. Press Pause on the LCD as many times as needed for longer pauses.
Peer-to-Peer
Peer-to-Peer is a type of printing in a peer-to-peer environment. In a peer-to-peer environment, each computer sends
and receives data directly to and from each device. There is no central server controlling access or machine sharing.
Photo resolution (B&W only)
A resolution setting that uses varying shades of gray for the best representation of photographs.
Protocols
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain access
to network-connected resources. The print server used on your Dell machine supports the Transmission Control
Protocol/Internet Protocol (TCP/IP) protocol.
Pulse
This feature is not available in some countries.
A form of rotary dialing on a telephone line.
R
RARP
Reverse Address Resolution Protocol (RARP) finds the logical address for a machine that knows only its physical
address.
NOTE: To use RARP, contact your network administrator.
Real Time Transmission
When memory is full, you can send faxes in real time.
Remaining Jobs
You can check which programmed fax jobs are waiting in the memory and cancel the jobs individually.
Remote Access Code
Your own four-digit code (– – –*) that allows you to call and access your machine from a remote location.
Remote Activation Code (Fax/Tel Mode only)
Press this code (*51) when you answer a fax call on an extension or external telephone.
Remote Deactivation Code (Fax/Tel Mode only)