Users Guide

238 Security
NOTE: When you use the SNMPv3 read-write access and v1/v2c read-only access mode, some Dell
applications that access to the print server do not work correctly since they authorize the read-only access of
version 1 and version 2c. If you want to use all applications, use the SNMP v1/v2c read-write access mode.
•SNMPv3 read-write access
With this mode, the print sever uses version 3 of the SNMP protocol. If you want to manage the print server
securely, use this mode.
NOTE: When you use the SNMPv3 read-write access mode, note the following:
•You can manage the print server using Web Based Management only.
•All applications that use SNMPv1/v2c will be restricted. To allow the use of SNMPv1/v2c applications,
use SNMPv3 read-write access and v1/v2c read-only access or SNMP v1/v2c read-write access mode.
Send an Email Securely
•Configure Email Sending Using Web Based Management
•Send an Email with User Authentication
Configure Email Sending Using Web Based Management
Related Models:Dell E515dn / Dell E515dw
We recommend using Web Based Management to configure secured email sending with user authentication.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's
IP address).
For example: http://192.168.1.2
NOTE: If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
• For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
• For example:
http://DELL000499
The NetBIOS name can be found in the Network Configuration Report.
NOTE: For Macintosh, access Web Based Management by clicking the machine's icon on the Status Monitor
screen.
3. No password is required by default. Type a password if you have set one, and then click
.
4. Click the Network tab.