Users Guide

229Network
Ethernet (Wired Network Only)
Ethernet link mode allows the print server to operate in 100BASE-TX full or half duplex or in 10BASE-T full or half
duplex mode by auto-negotiation.
NOTE: If you set this value incorrectly, you may not be able to communicate with your print server.
Wired Status
This field displays the current wired network status.
MAC Address
The MAC Address (Ethernet Address) is a unique number assigned for the machine's network interface. You can
check your machine's MAC Address on its control panel.
Setup Wizard (Wireless Network Only)
Related Models:Dell E514dw / Dell E515dw
The Setup Wizard guides you through the wireless network configuration.
WPS/AOSS™ (Wireless Network Only)
Related Models:Dell E514dw / Dell E515dw
If your wireless LAN access point/router supports either WPS (PBC) or AOSS™ (automatic wireless mode), you can
configure your Dell machine without a computer.
NOTE: WPS refers to Wi-Fi Protected Setup™.
NOTE: PBC refers to Push Button Configuration.
NOTE: AOSS™ refers to AirStation One-Touch Secure System.
WPS w/PIN Code (Wireless Network Only)
Related Models:Dell E514dw / Dell E515dw
If your wireless LAN access point/router supports WPS (PIN method), you can configure your Dell machine without
a computer.
NOTE: WPS refers to Wi-Fi Protected Setup™.
WLAN Status (Wireless Network Only)
Related Models:Dell E514dw / Dell E515dw
Status
This field displays the current wireless network status.
Signal
This field displays the current wireless network signal strength.
SSID