Users Guide

225Network
Reset the Network Settings to the Factory Settings
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
NOTE: This feature restores all wired and wireless network settings to the factory settings.
NOTE: You can also reset the print server to its factory settings using Web Based Management.
1. Press Menu.
2. Press p or q to display the Network option, and then press OK.
3. Press p or q to display the Network Reset option, and then press OK.
4. Follow the machine's instruction to reset the network settings.
The machine will restart.
Print the WLAN Report
Related Models:Dell E514dw / Dell E515dw
The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on
the printed report.
1. Press Menu.
2. Do one of the following:
•Dell E515dw Press p or q to display the Print Reports option, and then press OK.
•Dell E514dw Press p or q to display the Machine Info. option, and then press OK.
3. Press p or q to select the WLAN Report option, and then press OK.
4. Press Start
The machine will print the WLAN Report.
Wireless LAN Report Error Codes
Related Models:Dell E514dw / Dell E515dw
If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and refer to
the corresponding instructions in the table:
Error Code Problem and Recommended Solutions
TS-01 The wireless setting is not activated, turn the wireless setting to ON.
If a network cable is connected to your machine, disconnect it and turn the wireless setting of your machine to
ON.