Users Guide

179Machine Settings
Interface Select
Select the interface to use.
If you choose Auto, the machine automatically changes the interface to USB
or Ethernet depending on which interface is receiving data.
Auto IF Time
You must set the time-out period for the auto interface selection.
Input Buffer
Increases or decreases the input buffer capacity.
Replace Toner -
Sets the machine to continue printing after the LCD displays Replace
Toner
Print Menu
Level 1 Level 2 Description
Auto Continue -
Select this setting if you want the machine to clear paper size errors.
Media Type -
Sets the type of paper.
Paper -
Sets the size of paper.
Copies -
Sets the number of printed pages.
Orientation -
This machine can print pages in portrait or landscape orientation.
Print Position X Offset
Moves the print start position (at the top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in 300 dpi.
Y Offset
Moves the print start position (at the top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in 300 dpi.
Auto FF -
Allows the machine to print any remaining data automatically.
PCL Setting Font No.
Sets the font number.
Font Pitch
Sets the font pitch.
The Font Pitch menu will appear when you choose I042 to I054 in
Font No. setting.
Font Point
Sets the font size.
The Font Point menu will appear when you choose I000 to I041 in
Font No. setting.
Symbol Set
Sets the symbol set or the character set.
Table Print
Prints the code table.
Auto LF
ON: CR -> CR+LF, OFF: CR -> CR
Auto CR
ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR
OFF: LF -> LF, FF -> FF, or VT -> VT
Auto WRAP
Chooses whether a line feed and carriage return will happen when the
machine reaches the right margin.
Auto SKIP
Chooses whether a line feed and carriage return will happen when the
carriage position reaches the bottom margin.
Left Margin
Sets the left margin at column 0 to 70 columns at 1 cpi.
Right Margin
Sets the right margin at column 10 to 80 columns at 1 cpi.
Top Margin
Sets the top margin at a distance from the top edge of the paper.
Bottom Margin
Sets the bottom margin at a distance from the bottom edge of the paper.
Lines
Sets the number of lines on each page.