Users Guide

113Network
WPS w/PIN Code (Wireless Network Only)
If your wireless LAN access point/router supports WPS (PIN method), you can configure your Dell machine without
a computer.
NOTE: WPS refers to Wi-Fi Protected Setup™.
WLAN Status (Wireless Network Only)
Status
This field displays the current wireless network status.
Signal
This field displays the current wireless network signal strength.
Channel
This field displays the current wireless network channel.
Speed
This field displays the current wireless network speed.
SSID
This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID name.
Comm.Mode
This field displays the current wireless network communication mode.
Set to Default
Select the Set to Default option to reset each wired or wireless setting to the factory default.
Wired Enable (Wired Network Only)
Set the Wired Enable option to On when you want to use a wired network connection.
WLAN Enable (Wireless Network Only)
Set the WLAN Enable option to On when you want to use a wireless network connection.
Wi-Fi Direct
This type of connection is a Wi-Fi standard that allows devices to connect with each other without a wireless access
point, using secured method.
Network Reset
Select the Network Reset option to reset the print server to its default factory settings.