Users Guide

42 │ Operating your monitor
4
Exit
To exit or return to the OSD main menu.
5
Power button
(with power-status light)
To turn the monitor on or off.
Solid white light indicates the monitor is turned
on and functioning normally. Blinking white light
indicates the monitor is in standby mode.
Turning on the monitor
Press the button to turn on the monitor.
E2420HS/E2720HS
Using the front panel controls:
Use the control buttons at the bottom edge of the monitor to adjust the image
being displayed.
E2420HS/E2720HS
12345
The following table describes the control buttons:
Control Buttons Description
1
Preset modes
Use this button to choose from a list of preset
modes.
2
Volume
Use the Volume key to direct access to the
"Volume" control menu. (E2X20HS)