Owner's Manual

Using the E-View Laptop Stand 13
Connecting a Laptop to a Port Replicator in the
Laptop Stand
1 Hold the laptop at an angle and place the front of the laptop on the size
adjustment tray.
2 Use your laptop to slide the tray out if you need to adjust the space to
accomodate a larger laptop.
3 Center the laptop with port replicator and lower the back of the laptop
onto the port replicator.
4 Push down on the laptop to connect the laptop to the port replicator. You
should feel the laptop click into place.
1 laptop 2 battery size adjuster
3 port replicator docking connector 4 size adjustment tray
1
2
3
4