Owners Manual

Next steps
1 Replace the Microsemi supercap battery.
2 Complete the procedure listed in After working inside your system.
Installing Microsemi supercap
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section. Safety instructions.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Locate the place holder in the assigned location. The screw holes on the chassis and holder align when the holder is placed correctly.
Figure 36. Locating the supercap
2 Insert the screws in the holder and tighten to secure the holder in place.
94
Installation and Service Manual
Installing and removing server components