Owners Manual

Table 41. Assembly material
Description Quantity Torque (lbs/inch)
M3 screw 4 (1 per HDD) 6 ± 0.2
3 Align the HDD assembly in the chassis.
4 Install the HDD assembly and slide it to seat properly.
5 Secure with the thumb screw.
Figure 24. Installing the 2.5-inch HDD assembly
Next step
1 Complete the procedure listed in After working inside your system.
Server board
A server board (also known as the motherboard) is the main printed circuit board in the system with dierent connectors used to connect
dierent components or peripherals of the system. A server board provides the electrical connections to the components in the system to
communicate.
Removing server board
Prerequisites
CAUTION
: Do not attempt to remove the TPM plug-in module from the server board. Once the TPM plug-in module is installed,
it is cryptographically bound to that specic server board. Any attempt to remove an installed TPM plug-in module breaks the
cryptographic binding, and it cannot be reinstalled or installed on another server board.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Complete the procedure listed in Before working inside your system.
3 Remove the PCIe card.
78
Installation and Service Manual
Installing and removing server components