Owners Manual

Next steps
1 Install a 2.5-inch HDD into a rear bay.
2 Complete the procedure listed in After working inside your system.
Installing 2.5-inch hard drive into the rear bay
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Align the HDD with the HDD carrier. Make sure the connectors are facing the front. Make sure the connectors are positioned as
demonstrated in the following illustration.
2 Secure the HDD with the provided screws.
76 Installation and Service Manual
Installing and removing server components