Owners Manual

NOTE: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click System Information.
System Information details
The System Information screen details are explained as follows:
Table 27. System Information
Option Description
System Model Name Species the system model name.
System BIOS Version Species the BIOS version installed on the system.
System Management Engine Version Species the current version of the Management Engine rmware.
System Service Tag Species the system Service Tag.
System Manufacturer Species the name of the system manufacturer
System Manufacturer Contact Information Species the contact information of the system manufacturer.
System CPLD Version Species the current version of the system complex programmable logic device (CPLD)
rmware.
UEFI Compliance Version Species the UEFI compliance level of the system rmware.
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specic memory functions, such as system
memory testing and node interleaving.
Viewing Memory Settings
About this task
To view the Memory Settings screen, perform the following steps:
Steps
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Memory Settings.
34
Installation and Service Manual
Pre-operating system management applications