Owners Manual

5 Pull the OCP card back to release the I/O ports from the chassis, and lift the OCP card out to remove.
1
2
Figure 101. Removing the OCP card
Next steps
1 Install the OCP card.
2 Install the mezzanine card.
3 Complete the procedure listed in After working inside your system.
Installing OCP card into slot 3
Prerequisites
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Align the I/O ports on the OCP card with the front of the server.
2 Angle the OCP card into the I/O ports. Make sure the ports on the OCP card are seated correctly in the chassis.
3 Gently lower the OCP card and press the OCP card into the server board connector until it is fully seated.
Installation and Service Manual
Installing and removing server components
191