Owners Manual

Table 63. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 3 6 ± 0.2
Next step
1 Complete the procedure listed in After working inside your system.
Removing OCP card from slot 3
Prerequisites
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
3 Remove the mezzanine card.
Steps
1 Remove the securing screws from the slot cover.
2 Remove the slot cover.
Figure 100. Removing the slot cover
3 Release the hooks locked on the OCP card.
4 Grasp the back of the OCP card and tilt upward. Do not lift the back of the OCP card completely to prevent damage to the
components and I/O ports on the front.
190
Installation and Service Manual
Installing and removing server components