Owners Manual

Next step
1 Complete the procedure listed in After working inside your system.
Removing x16 SATA M.2 card
Prerequisites
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Loosen the captive screw securing the SATA M.2 card.
2 Unlock the hook from the SATA M.2 card and remove the SATA M.2 card form the server board.
Figure 80. Removing the SATA M.2 card
3 Remove the screw securing the SATA M.2 card and M.2 SSD board.
4 Rotate the M.2 SSD board out and remove.
156
Installation and Service Manual
Installing and removing server components