Owners Manual

Figure 55. Assembling the Mini PERC card and cable on the bracket
Table 48. Assembly material
Description Quantity Torque (lbs/inch)
FIX screw 2 6 ± 0.2
8 Align the bridge board with the riser board connector.
9 Install the bridge board.
Figure 56. Installing the bridge board on the Mini PERC assembly
10 Turn the Mini PERC assembly over and align it with the screw posts on the chassis and the connector on the server board.
11 Press the Mini PERC assembly into the server board connector until it is fully seated.
12 Secure the Mini PERC assembly with the provided screws.
120
Installation and Service Manual
Installing and removing server components