Owners Manual

Next steps
1 Install the 3.5-inch HDD into a rear bay.
2 Complete the procedure listed in After working inside your system.
Installing 3.5-inch hard drive in the rear bay
Prerequisites
NOTE: The procedure is available only for DSS 9620 server with 3.5-inch HDD.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Complete the procedure listed in Before working inside your system.
Steps
1 Align the HDD tray with the standos on the server base.
2 Secure the HDD tray with the provided screws.
Installing and removing server components 95