Owners Manual

Next steps
1 Install the HDD backplane.
2 Complete the procedure listed in After working inside your system.
Installing HDD backplane
Prerequisites
NOTE: The procedure is available only for DSS 9620 server with 2.5-inch hot swappable HDDs.
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
3 Remove the 3.5-inch or 2.5-inch hot swappable HDDs.
Steps
1 Align the HDD backplane to the HDD cage in the chassis.
2 Install the HDD backplane.
3 Secure the HDD backplane with the provided screw.
4 Connect the power cabling and miniSAS cable to the HDD backplane.
280 Installing and removing server components