Owners Manual
Table 75. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 2 6 ± 0.2
11 Connect the cables to the NPIO card assembly.
Figure 135. Connecting the cables
Next steps
1 Follow the procedure listed in the After working inside your system.
2 Install any device drivers needed for the card as described in the documentation for the card.
Removing NPIO card from hot swappable bay
Prerequisites
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section
Steps
1 Disconnect the cables from the NPIO card assembly.
2 Remove the securing screws from the NPIO card assembly.
3 Remove the NPIO card assembly from the chassis.
256
Installing and removing server components