Owners Manual
Convention Status Condition
C Link indicator is amber and activity
indicator is blinking green
The NIC is connected to a valid network at less than its maximum port speed
and data is being sent or received.
D Link indicator is green and activity
indicator is o
The NIC is connected to a valid network at its maximum port speed and data
is not being sent or received.
E Link indicator is amber and activity
indicator is o
The NIC is connected to a valid network at less than its maximum port speed
and data is not being sent or received.
F Link indicator is blinking green and
activity is o
NIC identify is enabled through the NIC conguration utility.
HDD Indicator codes
The expansion adapter has LED headers that correspond to access activity and link status.
PERC H330 Mini Mono, PERC H730P Mini Mono, PERC H730 and Broadcom 9361-8i
Table 6. PERC H330 Mini Mono, PERC H730P Mini Mono, PERC H730 and Broadcom 9361-8i
LED state HDD state Green LED Amber LED
1 Empty O O
2 Online On O
3 Identify/Prepare for removal Blinking O
4 Rebuild Blinking O
5 Fault O Blinking
Locating your system service tag
Your system is identied by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag are found
on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.
Figure 5. Service Tag location
Overview
11