Owners Manual

Figure 36. Removing the 2.5-inch HDD

1 Install the 2.5-inch HDD into a tray.

2 Complete the procedure listed in After working inside your system.

Installing 2.5-inch hard drive into a tray

1 Follow the safety guidelines listed in the Safety instructions section.

2 Complete the procedure listed in Before working inside your system.

1 Align the HDD in the adapter bracket. Make sure the screw holes on the HDD are aligned with the screw holes on the adapter bracket.

2 Secure the HDD and adapter bracket with the provided screws.

Installing and removing server components