Owners Manual

Figure 10. Separating the processor and heat sink

3 Release the latches to unlock the processor from the carrier. Allow some time (approximately 30 seconds) for the heat sink to loosen

from the processor.

4 Remove the processor.

Figure 11. Separating the processor and carrier

1 Install the new processor.

2 Complete the procedure listed in After working inside your system.

Installing processor

1 Ensure that you read the Safety instructions.

2 Before upgrading your system, download the latest system BIOS version from http://dell.com/support and follow the instructions

included in the compressed download le to install the update on your system.

NOTE

: You can update the system BIOS using the Dell Lifecycle Controller.

3 Complete the procedure listed in Before working inside your system.

1 Align the processor on the processor tray.

Installing and removing server components