Owners Manual
Option Description
CPU Interconnect Bus Link Power
Management
Enables or disables the CPU Interconnect Bus Link Power Management. This option is set
to Enabled by default.
PCI ASPM L1 Link Power Management Enables or disables the PCI ASPM L1 Link Power Management. This option is set to
Enabled by default.
Miscellaneous Settings
You can use the Miscellaneous Settings screen to perform specic functions such as updating the asset tag and changing the system
date and time.
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Miscellaneous Settings.
Miscellaneous Settings details
The Miscellaneous Settings screen details are explained as follows:
Table 37. Miscellaneous Settings
Option Description
System Time Enables you to set the time on the system.
System Date Enables you to set the date on the system.
Asset Tag Species the asset tag and enables you to modify it for security and tracking purposes.
Keyboard NumLock Enables you to set whether the system boots with the NumLock enabled or disabled. This
option is set to On by default.
NOTE: This option does not apply to 84-key keyboards.
F1/F2 Prompt on Error Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The
F1/F2 prompt also includes keyboard errors.
Load Legacy Video Option ROM Enables you to determine whether the system BIOS loads the legacy video (INT 10H)
option ROM from the video controller. Selecting Enabled in the operating system does not
support UEFI video output standards. This eld is available only for UEFI boot mode. You
cannot set the option to Enabled if UEFI Secure Boot mode is enabled.
In-System Characterization Enables or disables In-System Characterization. This option is set to Disabled by default.
The two other options are Enabled and Enabled - No Reboot.
Pre-operating system management applications 43