Owners Manual

Option Description
Port I
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
Model: Species the drive model of the selected device.
Drive Type: Species the type of drive attached to the SATA port.
Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port J
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
Model: Species the drive model of the selected device.
Drive Type: Species the type of drive attached to the SATA port.
Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Integrated Devices
You can use the Integrated Devices screen to view and congure the settings of all integrated devices including the video controller,
integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Integrated Devices.
Integrated Devices details
The Integrated Devices screen details are explained as follows:
Table 34. Integrated Devices
Option Description
User Accessible USB Ports Enables or disables the USB ports. Selecting All Ports O disables all USB ports. The USB
keyboard and mouse operate during boot process in certain operating systems. After the
boot process is complete, the USB keyboard and mouse do not work if the ports are
disabled.
38 Pre-operating system management applications