Owners Manual

Option Description
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port D
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port E
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port F
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Port G
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
Port H
Sets the drive type of the selected device. For the Embedded SATA settings in ATA
mode, set this eld to Auto to enable BIOS support. Set it to OFF to turn o BIOS
support.
For AHCI mode, BIOS support is always enabled.
• Model: Species the drive model of the selected device.
• Drive Type: Species the type of drive attached to the SATA port.
• Capacity: Species the total capacity of the hard drive. This eld is undened for
removable media devices such as optical drives.
Pre-operating system management applications 37