Owners Manual

System Setup details

Table 24. System Setup Main Menu

Option Description

System BIOS Enables you to congure BIOS settings.

iDRAC Settings Enables you to congure the iDRAC settings.

The iDRAC settings utility is an interface to set up and congure the iDRAC parameters by

using UEFI (Unied Extensible Firmware Interface). You can enable or disable various

iDRAC parameters by using the iDRAC settings utility. For more information about this

utility, see Integrated Dell Remote Access Controller User’s Guide at http://Dell.com/

idracmanuals.

iDRAC Settings Enables you to congure BMC settings.

The iDRAC settings utility is an interface to set up and congure the BMC parameters by

using UEFI. You can enable or disable various BMC parameters by using the iDRAC settings

utility. For more information about this utility, see Integrated Dell Remote Access Controller

8 User’s Guide at http://Dell.com/idracmanuals.

Device Settings Enables you to congure device settings.

System BIOS

You can use the System BIOS screen to edit specic functions such as boot order, system password, setup password, set the RAID mode,

and enable or disable USB ports.

Viewing System BIOS

To view the System BIOS screen, perform the following steps:

1 Turn on, or restart your system.

2 Press F2 immediately after you see the following message:

F2 = System Setup

NOTE

: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart

your system and try again.

3 On the System Setup Main Menu screen, click System BIOS.

System BIOS Settings details

The System BIOS Settings screen details are explained as follows:

Pre-operating system management applications