Owners Manual

Figure 110. Installing the PCIe card assembly
Table 65. Assembly material
Description Quantity Torque (lbs/inch)
#6-32 screw 2 6 ± 0.2
1 Follow the procedure listed in the After working inside your system.
2 Install any device drivers needed for the card as described in the documentation for the card.
OCP card
Removing OCP card from slot 1
1 Ensure that you read the Safety instructions.
2 Complete the procedure listed in Before working inside your system.
1 Remove the securing screws from the OCP card assembly.
2 Remove the OCP card assembly from the chassis.
NOTE
: You must install an expansion card ller cover over an empty expansion slot to maintain Federal Communications
Commission (FCC) certication of the system. The covers also keep dust and dirt out of the system and aid in proper
cooling and airow inside the system.
156 Installing and removing server components