Owners Manual

3 Remove the screws securing the FPDB.
4 Remove the FPDB.
Figure 69. Removing the FPDB
Installing FPDB
1 Align the FPDB with the fan board bracket and install. Make sure the connectors are facing outward as seen in the following gure.
2 Secure the FPDB with screws.
Figure 70. Installing the FPDB
Table 35. Assembly material
Description Quantity Torque (lbs/inch)
A: 6-32_STEP 2 8 ± 0.5
B: 6-32_4-5_SCREW 2 8 ± 0.5
3 Align the hooks on the FPDB assembly with the slots on the rear cabinet base.
4 Slide the FPDB assembly to install.
5 Secure the FPDB assembly with screws.
Installation and Service Manual
Installing and removing system components
109