Owners Manual

7. Remove all PSUs.

8. Remove all server sleds.

9. Remove all expander boards.

10. Remove the interposer board.

Steps

1. Use the hooks on the chassis as guides to align the HDD backplane.

2. Slide the backplane to lock the guide pins.

3. Install the two standos through the backplane and secure them to the chassis.

4. Secure the backplane with the 26 screws.

5. Place the HDD cage inside the chassis and secure it with the 18 screws.

6. Secure the HDD cage to the chassis with the 24 screws.

Next steps

1. Install the interposer board.

2. Connect all cables to the backplane.

3. Install all expander boards.

4. Install the fan cage and all system fans.

5. Install all server sleds.

6. Install the HDDs in their original locations.

Begin with slot number 44 in the descending order.

7. Install all PSUs.

8. Install the system cover.

9. Complete the procedure listed in After working inside your system.