Owners Manual
92
5 interposer board 6 mini-SAS HD cable (2)
7 HDD backplane
NOTE: For single-node systems, the interposer board looks dierently and its number of SAS
connectors varies.
11. Remove the interposer board.
Steps
1. Remove the 24 screws securing the HDD cage to the chassis.
2. Loosen the 18 screws and lift the HDD cage out of the chassis.
Figure 44. Removing and Installing the HDD cage
1 screw (24) 2 screw (18)
3. Remove the 26 screws from the backplane.
4. Remove the two standos from the backplane and chassis.
5. Slide the backplane to unlock the guide pins.
6. Lift the backplane out of the chassis.