Owners Manual

9
Item Indicator, Button, or
Connector
Icon Description
1 Power indicator
The power indicator glows when the system is
turned on.
2 ID indicator
When a system identification button is pressed,
the ID indicator blinks blue to help locate a
particular system within a rack.
3 Sled A HDD fault status
indicator
The indicator blinks amber if an HDD experiences
an issue.
4 System board status
indicator
If the system is on, and in good health, the
indicator glows solid blue.
The indicator blinks amber if the system is in
standby, and if any issue exists (for example, a
failed fan or HDD).
5 Power button
The power button controls the PSU output to the
system.
NOTE: On ACPI-compliant operating
systems (OSs), turning o the system using
the power button causes the system to
perform a graceful shutdown before power
to the system is turned o.
6 System identification
button
The identification button can be used to locate a
particular system within a rack.
Press to toggle the system ID on and o.
If the system stops responding during POST,
press and hold the system ID button for more
than five seconds to enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup)
press and hold the button for more than 15
seconds.
7 Power indicator
The power indicator glows when the system is
turned on.
8 ID indicator
When a system identification button is pressed,
the ID indicator blinks blue to help locate a
particular system within a rack.
9 Sled B HDD fault status
indicator
The indicator blinks amber if an HDD experiences
an issue.
10 System board status
indicator
If the system is on, and in good health, the
indicator glows solid blue.
The indicator blinks amber if the system is in
standby, and if any issue exists (for example, a
failed fan or HDD).