Owners Manual

87
Next steps
1. Install the system fans and fan cage.
2. Install the system cover.
3. Install the server sleds.
4. Complete the procedure listed in After working inside your system.
Related Links
Removing the server sled
Installing the server sled
Removing the system cover
Installing the system cover
Removing a system fan
Installing a system fan
Removing the fan cage
Installing the fan cage
Expander board
Removing the expander board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Complete the procedure listed in Before working inside your system.
3. Remove the PSUs from the system.
4. Remove the system cover.
Steps
1. Remove the PSUs.
2. Loosen the two screws, and then open and pull the handle to remove the expander board bracket
from the chassis.