Owners Manual

78
Removing an HDD adapter from an HDD carrier
Prerequisites
1. Ensure that you read the Safety instructions.
2. Keep the #2 Phillips screwdriver ready.
Steps
1. Remove the screws from the slide rails on the HDD carrier.
2. Lift the HDD adapter out of the HDD carrier.
Removing a 2.5-inch SSD from an HDD carrier
Prerequisites
1. Keep the #2 Phillips screwdriver ready.
2. Remove the HDD carrier from the system.
Steps
1. Remove the screws from the slide rails on the HDD carrier.
2. Lift the HDD out of the HDD carrier.
Figure 35. Removing and installing a 2.5-inch SSD into an HDD carrier
1 screw (4) 2 SSD
3 HDD carrier
Installing an HDD into an HDD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.