Owners Manual

45
1. Ensure that you read the Safety instructions.
2. Complete the procedure listed in Before working inside your system.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
CAUTION: The replacement service time for server sleds when the system is operating is two
minutes.
Steps
1. Loosen the two screws locking the server sled.
2. Pull the lever outward to release the server sled.
3. Pull the server sled sway from the system.
Figure 13. Removing and installing the server sled
1 lever (2) 2 server sled
3 screw (2)
Installing the server sled
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Complete the procedure listed in Before working inside your system.
Steps
1. Install the server sled into the system.
Pay attention not to damage the airmax connectors during installation.
2. Push the lever inward to put the server sled into place.
3. Tighten the two screws to secure the server sled.